%20USB%202.0%20to%20TTL%20UART%20serial%20converter%20-%20Black/2-250x250.jpg "CP2102 (6-pin) USB 2.0 to TTL UART serial converter - Black")
%20USB%202.0%20to%20TTL%20UART%20serial%20converter%20-%20Black/6-250x250.jpg "CP2102 (6-pin) USB 2.0 to TTL UART serial converter - Black")
Model: Interface Module
This is the CP2102(6-pin) USB 2.0 to TTL UART serial converter module. This is a great little tool for embedded systems that require a serial connection to a computer. The board can simply attach to a USB bus and will appear as a standard COM port.Thisbreakout also allows you to connect the TX/..
Rs.160
Model: Interface Module
CP2102 chip is a single chip USB to UART bridge IC. It requires minimal external components. CP2102 can be used to migrate legacy serial port based devices to USB.Features :Stable and reliable chipset CP2102.USB specification 2.0 compliant with full-speed 12Mbps.Standard USB type A male and TTL 6pin..
Rs.140
Model: Ethernet LAN Module
The ENC28J60 is a stand-alone Ethernet controller with an industry
standard Serial Peripheral Interface. It is designed to serve as an Ethernet
network interface for any controller equipped with SPI.ENC28J60 Ethernet Module utilizes the Microchip ENC28J60 Stand-Alone
Ethernet Controller..
Rs.355
Out Of Stock
Model: Interface Module
The ENC28J60 Ethernet Module is a board which contains an Ethernet port and converts Ethernet input into SPI. The board is based on Microchip’s ENC28J60 integrated circuit and it can be used to provide internet connectivity to microcontroller systems like arduino boards over..
Rs.365
Model: Interface Module
The USB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module is a basic breakout board for the FTDI FT232RL USB to serial IC, Revision 2. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for gener..
Rs.145
Out Of Stock
Model: Interface Module IIC/I2C
This is a RoHS compliant I2C Serial LCD Daughter board that can be connected to a standard 16×2 or 20×4 Character Display Module that supports 4-bit mode. All Character Modules sold on our site support 4-bit mode, and nearly all commercially available 16×2 and 20×4 line character modules suppor..
Rs.75
Out Of Stock
Model: Interface Module
The PCF8574 IO Expansion Board is used as remote 8-bit I/O expander for I2C-bus. Up to 8 PCF8574, IO Expansion Board can be connected to the I2C-bus, providing up to 64 I/O ports.The PCF8574 IO Expansion Board features I2C pinheader on one side, and I2C connector on the..
Rs.225
Out Of Stock
Model: Interface Module
This is PL2303 PL2303HX USB To TTL(Serial) Converter Module – 5 Pin. Adopt imported controller RS232 TTL, which can stabilize the flash with high-speed 500mA self-recovery fuse for protection.Two data transmission indicator can monitor data transfer status in real-time. Reserve 3.3V and 5V pin inter..
Rs.65
Out Of Stock
Model: Interface Module
It can be easily interfaced as a peripheral to your Arduino, and other embedded boards and microcontrollers. Through programming, you can read and write to the SD card over the SPI interface. This module can handle 2GB SD cards.SD Card Reading Writing Module for Arduino with the onboard 3..
Rs.72
/2-250x250.jpg "SN75176BDR – 5V Differential Bus Transceiver Multipoint Transmission 8-Pin SOIC Texas Instruments (TI)")
Out Of Stock
Model: Interface Module
SN75176BDR – 5V Differential Bus Transceiver Multipoint Transmission ICFeatures :IC Name: SN75176BDRPackage/Case: SMD-8Package Includes:1 x SN75176BDR – 5V Differential Bus Transceiver Multipoint Transmission IC SMD-8 Package..
Rs.60
Model: Interface Module
The USB ASP AVR Programming Device for ATMEL processors is a USB in-circuit programmer for Atmel AVR controllers. USB ASP AVR Programming Device for ATMEL Processors simply consists of an ATMega88 or an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver; no sp..
Rs.235
Showing 1 to 11 of 11 (1 Pages)